Blackberry software and hardware problems are often encountered

Posted by service centre at 1:48 AM Read our previous post

Here I will share information about the Blackberry problem frequently encountered and solutions.
Blackberry problem frequently encountered include :

-Problems Blackberry Software :

• Dead phone when will answer incoming calls.

Very upset if you have it, especially if the phone is a very important call. You could be mistaken for arrogance or even the suspect as directly off the call. The way to overcome this problem is to remove the battery from the handset. Schedule to remove the batteries at least once a week, remove about five to ten minutes and then enter again. This was done for the memory refresh Blackberry.

• Often Blank screen.

Things like this are common on handsets that use the operating system like a computer.
Usually trying to do softreset and unplug the memory card if available. if this does not work try to upgrade or downgrade Blackberry operating system.

• Email

Email is the delete, but not too lost. There are several causes of this problem. Can not sync due to error or data base. The way to overcome this problem is that after deleting emails from outlook inbox, delete it permanently by pressing the Shift and Delete simultaneously. Can also do it manually by deleting the folder and delete items. Another problem is sometimes the email can not enter email in the Inbox. This is due memori.Blackberry you are full, so that new emails can not enter. To fix this we can re-register. How to get to the Main Menu Option >> Advance >> select and navigate to the Host Rotating Table >> Select Menu >> Register Now >> and the last Registration Message Sent.
Those that are not able to send emal. This can occur because of problems on the GPRS network service. First you can do a soft reset by pressing the ALT + CAP + DELETE simultaneously. Both do a hard reset by pressing the reset button located on the back of the handset. check the antenna symbol on your BB. After doing this a second reset should the logo have been shown to signal GPRS antenna and try to send email to yourself. 


-Problems Hardware Blackberry :

• Dust screens.

An electronic device that is always carrying around is very easy to hit the dirt. Fairly easy way to clean it. Each unit is usually mounted screws Blackberry that can be open with a screwdriver sized T5 and T6.Perlu in mind, you should not force the screw because it can lead to fractures. Do not use paper towels to clean it, use a soft cloth as it is commonly used to clean eyeglasses.

• Port USB worn.

This usually happens if you are unplugging the USB cable connected to the BB with a swing shake the cable. At first it seemed difficult at the USB port disconnect. But it will adjust itself. The safest way is the right move it without cable USB kiri.Port will not be repaired after it was damaged. The only way is to replace with new parts.

• Not Responsive Touchscreen Storm.

Sometimes touchscreen with SurePress technology is not responding properly to your wishes. Storm's big screen usually feels soft when pressed. But there are some cases respond to storm the screen only in certain parts only. You need to know that the Storm are four small screws at the plant at each end of the screen. This four screws that control the level of responsibility to the pressure on the screen. You can actually make your own arrangements for these screws. But of course requires a high accuracy tingakat as you will deal with items that are small and very vulnerable.

• The elements of the Side Not Work.

This usually happens after you replace the Bezel or side bone on the Blackberry. Bezel This is a place to put elements such as sound button. USB port, headphone jack, and lain2. Maybe the new bezel is not correctly installed so that the features are not going well. The safest way is to change back to the original bezel. But if you are already happy with the new bezel, we recommend to check and correct the location of the bezel.

• Trackball Problems.

Trackball will not move, this usually occurs because the existing roller trackball around on dirty or dusty. You can actually own a roller membersikan this. The trick is to disassemble the trackball device. To clean the roller is simply carried out the fourth with a two jari.Namun mengosokannya you should be careful when opening the trackball because these devices are very vulnerable. If the way is still failing solution is to replace a new trackball.

Happy to share information with others.